Nonwoven Fabric Substrate - List of Manufacturers, Suppliers, Companies and Products

Nonwoven Fabric Substrate Product List

1～4 item / All 4 items

Displayed results
Non-woven fabric substrate "re-peelable double-sided adhesive tape"

Non-woven fabric substrate "re-peelable double-sided adhesive tape"

Exhibits strong adhesive power on various substrates! Can be removed without residue even after long-term application.

The "Re-Release Double-Sided Adhesive Tape" is a product in which an acrylic adhesive is uniformly applied to both sides of a special strong non-woven fabric. It exhibits strong adhesion to various substrates while allowing for clean removal without adhesive residue even after long-term application. It is particularly excellent for adhesion and removal on plastics, making it suitable for products that require the reuse and recycling of components. 【Features】 ■ Can be removed from substrates without adhesive residue or substrate breakage ■ High adhesion to various substrates ■ Especially superior adhesion to plastics ■ Well-suited for products that require the reuse and recycling of components and for die-cut products *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • others
  • Nonwoven Fabric Substrate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-woven fabric substrate "General Tape"

Non-woven fabric substrate "General Tape"

Excellent adhesion even for low surface energy plastics! A black type is also available.

This product is a general-purpose tape coated on both sides with a highly adhesive acrylic-based pressure-sensitive adhesive on a flexible non-woven fabric substrate. It has excellent adhesion to various materials and demonstrates strong adhesion even to low surface energy plastics such as P.P. and P.E. Additionally, it maintains initial tack well at low temperatures and exhibits superior adhesion to rough surfaces compared to other tapes. 【Features】 ■ Excellent adhesion to various materials ■ Maintains initial tack well at low temperatures ■ Superior adhesion to rough surfaces compared to other tapes ■ Uses release paper with excellent die-cut (full cut) and half-cut (partial cut) properties ■ Minimizes roll deformation such as gapping and telescoping *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • others
  • Nonwoven Fabric Substrate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-woven fabric substrate "Thin Tape"

Non-woven fabric substrate "Thin Tape"

Thinner than conventional non-woven tape! Double-sided tape with excellent adhesion for various applications.

The "Thin Tape" is a double-sided tape coated with an acrylic adhesive on a non-woven fabric substrate. It is thinner compared to general-purpose tapes but exhibits good adhesive strength. It can be used for various applications such as fixing different types of foam materials, nameplates, signboards, and lightweight components. 【Features】 ■ Thinner than conventional non-woven fabric tapes ■ Excellent adhesion properties ■ Tape colors available in milky white and colorless to light yellow translucent *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • others
  • Nonwoven Fabric Substrate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NCF-Resinply

NCF-Resinply

Introduction of new NCF products applicable to press molding such as continuous compression molding.

Features Regarding design flexibility, there is a notable adaptability in specifications such as material selection, laminate composition, and stitch design. Additionally, it is possible to continuously produce substrates with reinforcing fibers oriented both vertically and horizontally, as well as diagonally, allowing for product proposals tailored to customer requirements. For imparting drapeability, the selection of reinforcing fibers and resins, design of basis weight, laminate composition, and stitch conditions can facilitate material deformation, or conversely, adjust the material to achieve shape stability under load. In terms of labor-saving in the molding process, during the lamination process, there is no need to separately laminate or inject resin layers as with conventional NCF; instead, cut materials can be directly laminated and heated under pressure to obtain molded products. Regarding the ability to achieve stable quality molded products, NCF-Resinply is a material where the reinforcing fibers (NCF) and resin layers are integrated through stitching, which minimizes disturbances in fiber orientation due to resin flow during heating and pressurization, thereby enhancing fiber orientation accuracy. As a result, the molded products can achieve various physical properties, including strength and rigidity, as intended by the designer.

  • others
  • Nonwoven Fabric Substrate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Nonwoven Fabric Substrate

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.